• 215-321-6012
  • Home
  • About Us
  • Ask Dr. Level
  • Seeking Reps
  • Contact Us

HiTECH Technologies, Inc.

Satisfying the World's Level Control Requirements Since 1986

  • Level Products
    • Level Transmitters
    • Level Switches
  • Transmitters
    • Pressure Transmitters
    • Temperature Transmitters
  • Lasers
  • System Components
  • Industrial Sensors
  • Thermoelectric Coolers

MultiCONT Multichannel Process Controllers

The MultiCONT unit is a universal interface between NIVELCO’s HART-capable intelligent level transmitters and the other elements of the process control system like the PC-s, PLC-s, displays and the actuators. Besides its role as an interface, the MultiCONTensures the powering of the 2-wire transmitters likewise capable of realizing complex control tasks. The MultiCONT unit supports communication with a maximum of 15 standard or 4 Ex ia certified NIVELCO’s HART-capable 2- and / or 4-wire transmitters. If MultiCONT is used with NIVELCO’s MicroTREK microwave level transmitters the maximum number of transmitters in a loop should not exceed 8 pcs. for normal transmitters and 2 pcs. for Ex ia version transmitters. Remote programming of the transmitters and downloading of the parameters and measured data is possible using the MultiCONT. The various outputs such as 4 … 20 mA, relays and digital outputs can be controlled using measured values and new values calculated from the measured values. The internal current outputs (max. 2 pcs.) of the MultiCONT can transfer and even modify information supplied by the transmitters. The built-in relays (max. 5 pcs.) can be freely programmed and assigned to the transmitters. If a system contains more transmitters than one MultiCONT can handle, further MultiCONT units can be organised in chain via RS485 interface. The large dot-matrix display allows visualisation of a wide range of informative display functions. One special feature is the “Echo-Map” visualisation when communicating with NIVELCO’s EchoTREK and EasyTREK transmitters.

Operating Principle:

Multichannel Process Controller

Features:

  • Programmer, indicator and controller for transmitters with HART protocol
  • Highly informative Dot-Matrix display back light
  • Tank visualisation
  • Data Logger
  • Menu-based simple 6-key programming
  • 1 to 15 input channels
  • Transmitter diagnostic capabilities
  • Explosion-proof models

Application:

  • Programmer, indicator and controller for single transmitters and for transmitter groups
  • RS485 comm. line with HART or MODBUS protocol

Specification:

  • Power supply: 11.4-40 V DC, 11.4-28 V AC or 85-255 V AC
  • Ambient temperature: -4 °F…+122°F
  • Input from transmitters: HART
  • Outputs, (depending on order): max. 2: 4-20 mA max. 4: SPDT relays RS 485
  • Outputs, extended with PJK-100 universal interface modules: max. 16: 4-20 mA max. 64: SPDT relays
  • Communication with host: RS 485
  • Protection: IP65
  • Approval: ATEX II (1) G [Ex ia Ga] IIB

Filed Under: System Components

Resources:

Multicont

Phone: 1-866-DR-LEVEL
Local: 215-321-6012
Fax: 215-321-6067
E-mail: info@hitechtech.com
301 Oxford Valley Road
Building 505A
Yardley, PA 19067-7711

Copyright © 2023 HiTech Technologies · Web Design by WebLink Studio