| Principle |
Penetrating Pulse Technology method from the container's bottom through its wall using
a PPT sensor. |
| Transmitter |
Single channel or double channel. |
| Mounting |
On the outside of the container. |
| Resolution |
1 % of the measuring area, maximum 1 mm. |
| Container material |
Steel, stainless steel, enameled steel, other metals, glass, plastics. |
| Adjustments |
Parameters are set with the keyboard and the integrated display or via the serial
interface. |
| Frequency of the measuring sequence |
Approx. 10 Hz. |
| Measuring frequency of ultrasonic sensors |
0.5 MHz and 1 MHz. |
| Output signal |
Relay switching contact (closing), max. 250 V / 5 A. |
| Interface |
Serial RS 485 interface. |
| Current output |
0/4...20 mA, invertible, isolated, zoom function. |
| Power supply |
19 ... 30 V AC/DC, 500 mA, approx. 3 s
response time after reinsertion of operating
voltage. |
| Enclosures |
| Electronics: |
plastics, 100 x 75 x 100 mm, IP 20. |
| Sensors: |
aluminum, 103 x 75 x 92 mm, IP 65 |
|
| Electrical connections |
Screw terminal connections. |
| Mounting |
Fastening is possible in a carrying frame / 35 mm. |
| Temperature range |
Electronics: -20 ... +70°C.
Sensors: -20 ... + 135°C. |
| Accessories |
Mounting bracket, cables, coupling gel. |
